Tag: garage doors

How to Reset The Code of a Garage Door Opener?

How to reset a Garage Door Opener

 

Do you think someone has hacked the code to open your garage door? Then the time has come to change it. Newer garage door opener comes with a keypad in addition to a remote. That’s why it is very easy to operate.
On the other hand, the older garage door is operated by a remote. In this system, you need to move switches inside the remote physically. And change the code.

 

However, if you want to know how to reset the code of a garage door opener, you have to read this blog. Here, you will come across proper guidance for both types of garage doors. So, carry on reading! And let’s start with the garage door with a keypad.

 

How to reset the newer model of garage door opener?

 

The newer model of garage door opener comes with many accessories. It allows users to operate the garage door with ease. Now, read the following steps to know how to reset the code of this opener.

 

  • You have to access the garage door motor unit attached to the ceiling of your garage.
  • You will see a “Learn” button located on the side of the motor.
  • Press this button and hold it down.
  • Then release the button when the light placed beside it goes out. It will erase the old code from the garage door opener’s memory.
  • Push the button on the garage door motor once again and press it until the light comes on again.
  • Then go to your wall-mounted keypad and type the code whatever you want.
  • You should monitor the motor unit’s light while doing this task. The light will blink. It indicates that the new code you have entered has been accepted.
  • Press the “Learn” button again so that the light on your garage door motor illuminates again.
  • Then press a button of your remote control. The light will blink. It denotes that the remote control has been programmed with the new code you entered.

 

Now, let’s move on to the garage door opener without a keypad.

 

How to change the code of an old garage door opener?

 

Here are the steps to change the code of an old garage door opener.

 

  • At first, you need to remove the cover of garage door remote control. This approach will allow you to get the small switches inside it.
  • Then you have to reposition the switches to change the code.
  • You need to replace the cover of remote control.
  • Then you have to gain access to the garage door motor attached to the garage ceiling.
  • Move the switches on the motor unit to match the code. And you need to set it on your remote control.
  • Then conduct a test to make sure that the remote can open your garage door.
  • If the door doesn’t open, you need to recheck the switch positions.

 

We, Superior Garage Door, can help you in this respect. Our experts can reset the code accurately. So, wait no more! Call us immediately!

Top 5 Garage Door Design Trends for 2020

 

garage door design trends

 

Nowadays, the trends in garage door design are evolving constantly with the New Year. And peoples are embracing these to a great extent to give their garage door a new look. Haven’t you still applied? Then contact the experts immediately! But are you well aware of the latest design trends for 2020? If not, then read the entire blog. These ideas will help you get inspired to update your garage door. So, let’s have a look!

 

Here are some latest garage door trends given

 

Take a look at the following points to be well aware of the latest garage door design trends for 2020.

 

  1. Stunning garage door designsThe garage door covers much of a house’s front. That’s why you must choose an outstanding garage door design that will enhance the appearance of your property. Nowadays, the usage of traditional and modern styles with an innovative pattern is on rising. It will attractively highlight your garage door. Besides, the materials, hardware play a crucial role in giving a garage door an eye-catching look.
  2. Add bold or dark colorsThe garage doors are usually light-colored. But be prepared to change as bold and dark colors have become the latest trend in 2020. Most homeowners are leaning towards dark shades of black and brown instead of light wood or white color. It gives the front of your home an attractive contrast.
  3. Smart garage doorsAs technology is upgrading day by day, the garage door has become more user-friendly. And it has also become a part of the latest trends. However, you can use Wi-Fi to unlock the garage door. As a result, you need not worry about leaving your car or where the remote is. Even if you forget to lock the door, you can open the app on your phone. And check whether you have locked the door or not. Hence, always embrace the latest trend in terms of technology.
  4. Insulated doorsChoosing an insulated garage door is the best option to be more environmentally friendly. It saves energy while heating or cooling a garage. And it results in reducing the cost of electricity bills. If you need to spend most of the time in your garage, you must go for the insulated garage door. Even wooden garage doors have also become popular due to the same reason.
  5. Adding glass windowsA garage door is not a place to keep your car only. You can also use it as a workshop, home office, etc. Therefore, if you spend time here, it’s desirable to let the natural light come into your garage. That’s why the demand for glass windows is increasing day by day in 2020. It brightens the inside of a garage and gives a stylish look to its exterior.

Well, incorporating these latest trends will make your garage door more functional and attractive. And that’s what we do. We are a leading garage door service provider. Our experts are truly entitled to update your garage door. So, don’t wait for more! Contact us immediately!

A Few Common Reasons Why The Garage Door Wouldn’t Open

The garage door is undoubtedly a crucial thing to keep your vehicle secured. But it can be frustrating if the door doesn’t function properly. Well, there are several reasons why the garage door would not open. It may be simple or complex. Whatever the reason is, you should replace or repair its parts to make it more functional.

However, as a property owner, you must know the common reasons for this annoying problem. You can have a clear idea by reading the entire blog. So, carry on reading!

garage door opening problem

Why your garage door wouldn’t open

Listed below are the common reasons why your garage door will not open. So, go through these attentively.

Remote control problem

The garage door would not open due to remote control malfunctioning. In this respect, there are a few things that will cause a problem while opening the door. These are such as:

  • If the garage door opens with the wall switch, a battery change can eliminate this problem.
  • The damaged antenna on the motor can block the signal. So, make sure that the antenna is hanging down from it.

Dirty and blocked photo-eye

Most old garage door comes with a photo-eye that detects the objects block the garage door. These are usually placed 4-6 inches above the ground. The photo-eye component of a garage door consists of two pieces. After activation, it sends a pea-sized laser beam from one end to another. However, the door will not open if the cord attached to the eye is damaged or cut. A leak or rainstorms can also spoil the photo-eye.

Disrupted power source

People sometimes unplug the power source and wonder the garage door opener cannot work. Does it sound ridiculous? But it happens. Hence, you need to make sure that you have plugged the garage door opener into a working outlet. And it is a must to check whether the outlet is working or not. Besides, you should also check the circuit breaker, fuse.

Broken torsion spring

The torsion spring is the first thing that can break the garage door assembly. Its breakage will produce a loud noise. In this situation, you should not open the door on your own. You must deliver this responsibility to skilled professionals with the right tools.

Snapped cables

If the torsion spring breaks, the cables can become snapped. It will cause damage to the wall and vehicle. And it can be more dangerous if a person touches it unwittingly. Under these circumstances, you need to call the garage door experts.

Misadjusted sensitivity

It can happen to an old and newly installed garage door. The door will stick closed if the sensitivity is too high or low. The sensitivity setting allows the opener to determine the force required to lower or raise the door. If there will be a problem, the opener considers the door either lightweight or heavyweight. As a result, the opener will not function properly. However, you need to reset the sensitivity by reading the manufacturer’s directions.

garage door company

You should contact a reputable garage door company to resolve this issue. They have a team of trained technicians who are well aware of garage door intricacies. So, why wait? Call the experts right now!