The garage door is undoubtedly a crucial thing to keep your vehicle secured. But it can be frustrating if the door doesn’t function properly. Well, there are several reasons why the garage door would not open. It may be simple or complex. Whatever the reason is, you should replace or repair its parts to make it more functional.
However, as a property owner, you must know the common reasons for this annoying problem. You can have a clear idea by reading the entire blog. So, carry on reading!
Why your garage door wouldn’t open
Listed below are the common reasons why your garage door will not open. So, go through these attentively.
Remote control problem
The garage door would not open due to remote control malfunctioning. In this respect, there are a few things that will cause a problem while opening the door. These are such as:
- If the garage door opens with the wall switch, a battery change can eliminate this problem.
- The damaged antenna on the motor can block the signal. So, make sure that the antenna is hanging down from it.
Dirty and blocked photo-eye
Most old garage door comes with a photo-eye that detects the objects block the garage door. These are usually placed 4-6 inches above the ground. The photo-eye component of a garage door consists of two pieces. After activation, it sends a pea-sized laser beam from one end to another. However, the door will not open if the cord attached to the eye is damaged or cut. A leak or rainstorms can also spoil the photo-eye.
Disrupted power source
People sometimes unplug the power source and wonder the garage door opener cannot work. Does it sound ridiculous? But it happens. Hence, you need to make sure that you have plugged the garage door opener into a working outlet. And it is a must to check whether the outlet is working or not. Besides, you should also check the circuit breaker, fuse.
Broken torsion spring
The torsion spring is the first thing that can break the garage door assembly. Its breakage will produce a loud noise. In this situation, you should not open the door on your own. You must deliver this responsibility to skilled professionals with the right tools.
If the torsion spring breaks, the cables can become snapped. It will cause damage to the wall and vehicle. And it can be more dangerous if a person touches it unwittingly. Under these circumstances, you need to call the garage door experts.
It can happen to an old and newly installed garage door. The door will stick closed if the sensitivity is too high or low. The sensitivity setting allows the opener to determine the force required to lower or raise the door. If there will be a problem, the opener considers the door either lightweight or heavyweight. As a result, the opener will not function properly. However, you need to reset the sensitivity by reading the manufacturer’s directions.
You should contact a reputable garage door company to resolve this issue. They have a team of trained technicians who are well aware of garage door intricacies. So, why wait? Call the experts right now!